westell E90-610015-06 can i use it with centurytel

Author	All Replies
lineman2010 @centurytel.net	westell E90-610015-06 can i use it with centurytel i recently upgraded my dsl from 3mb to 10mb, but my current model can only go up to 5mb. so i bought a dsl modem off craigslist westell E90-610015-06 rev c it was used for verizon. im having a hard time getting this thing to work for centurytel. i have a router already that i like. been trying to put this thing in to bridge mode and it says i have, but i can't get any connection out of it? will this even work with centurytel? should i upgrade the firmware? can anyone give me some hints on getting it working. thanks
	to forum · permalink · 2009-09-16 13:41:15 ·
seagreen Premium,Mod join:2001-05-14 out there ·Rock Island Commun.. Host: CenturyTel Wireless Service P.. Southern California HughesNet Satellite WildBlue Satellite	Can't answer the question about the modem model. Mine is a E90-610014-06 so it's a different model than what you have. Here are the instructions I used to set my Westell modem into bridge mode: »members.verizon.net/~res08lyg/6100.htm You'll need to figure out what the IP address range is that the modem is using and set a computer to another IP address in that same range. You probably already know that if you've gotten into the modem settings already. (ignore all references to MAC filtering/cloning - the instructions were written for Verizon users)
	to forum · permalink · · 2009-09-16 14:46:29 ·
lineman2009 @centurytel.net	thanks for the instructions. im looking to set this up with my router. both the router and the modem are using the same ip address. should i change one?
	to forum · permalink · 2009-09-16 15:10:21 ·
seagreen Premium,Mod join:2001-05-14 out there	Yeah - I have my modem at 192.168.0.1 and the router at 192.168.1.1.
	to forum · permalink · · 2009-09-16 18:18:31 ·
stroonza join:2004-12-27 Trussville, AL	reply to lineman2010 be sure to set the VPI/VCI. I had to set my zoom modem to VPI=8 and VCI=35 to work.
	to forum · permalink · · 2009-10-04 13:26:32 ·
Sheridan join:2008-10-26 Sheridan, MI ·CenturyLink	said by stroonza : be sure to set the VPI/VCI. I had to set my zoom modem to VPI=8 and VCI=35 to work. correct I am using an ATT modem w/ CLink and it works just fine the westell seemed buggy.
	to forum · permalink · · 2009-10-09 07:13:38 ·


Sunday, 29-Nov 04:25:56	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. republican-creole page compression OFF